ANALYSIS ON QUKIN’S PRODUCTS

ANALYSIS ON QUKIN’S PRODUCTS

Why Qukin can better control the surface quality.

  1. Qukin source it’s raw material from POSCO, BAOSTEEL 8 stainless steel sheet is originated from Taiwan, Krupp, Columnbia, Baosteel, TISCO, and other major steel production of high quality stainless steel. If stainless steel sheet is not from a good standard factory, the coils surface may have some problems, especially for the edge. They are not easily leveled and processed, after processing, there will be some vertical strips which make the surface not expected. Here is an example to show the bad finished surface is due to the material origin
  2. In the processing, sandbelt working time is a key factor for controlling the surface quality. If the sandbelt is new, the polished lines will be very rough and thick, and have less reflective effect.After the sandbelt has been used for a long time depending on the quality of the sandbelt,the polished strips maybe too shallow,which cannot reach the expected effect.
  3. After the surface processing, choosing the PVC film will have much influence on afterwards application. We have several kinds of film to be choosen, and they are suitable for different application. The film not only serves as a protection but also affect the afterwards processing.