2. Coil Polishing
Coil polishing machine can make more stable surface. The belt can be used for longer time. the surface is more stable than sheet polishing process; therefore, if customers order more than 10 tons of same width sheet or coil, coil polishing machine is better than sheet polishing.

3. Hot Rolled Polishing Stainless Steel Sheet

For hot rolled stainless steel sheet polishing, Qukin Corporation combined manual polishing with machinery polishing.
Due to hot rolled stainless steel sheet is thicker and the surface is based on No.1. Its surface may not be as even as 2B effect; therefore, fully automatic polishing may not reach a ideal No.4 or No.6 effect.

After machinery polishing, hot rolled stainless steel sheet will be processed with manual polishing, which can make the uneven part polished; therefore, manual polishing is an unnecessary part for hot rolled stainless steel sheet polishing.

Reasons to Choose Qukin Polished Stainless Steel Sheet:
You might wonder why you choose Qukin No.4 stainless steel sheet instead of others. The answer is simple. It’s because our Polished Stainless Steel Sheet is simply the best of the best.

Here are some reasons:
1. Raw Material
Our coil is originated from Taiwan, Krupp, Columnbia, Baosteel, TISCO, and other major steel production of high quality stainless steel. If coil is not from a good standard factory, the coils surface may have some problems, especially for the edge. They are not easily leveled and processed, after processing, there will be some vertical strips which make the surface not expected. Here is an example to show the bad finished surface is due to the material origin.Note: these white strips cannot be removed by polishing.

2.Sandbelt
In the processing, sandbelt working time is a key factor for controlling the surface quality. If the sandbelt is new, the polished lines will be very rough and thick, and have less reflective effect. After the sandbelt has been used for a long time depending on the quality of the sandbelt,the polished strips maybe too shallow,which cannot reach the expected effect.

3.Film
After the surface processing, choosing the PVC film will have much influence on afterwards application. We have several kinds of film to be choosen, and they are suitable for different application. The film not only serves as a protection but also affect the afterwards processing.
>Laser film: laser film is considered to be one of the best film. The thickness is at least 10c. Laser film normally has higher melting degree than other film, which will not be melted and sticked on the surface after heat treatment. Here is an example of normal film after heat treatment.(Please confirm the downstream processing, and then decide which film is to be applied.)